Search results: upright

Counting matching models…

Printables

Upright hollow printable Numbers / Digits

They are kind of stencil digits, but without the usual similarity to military stencils. Usable as lantern plate, key ring and much more…

Order a print of this model

Printables

Carvera Upright Chuck Subplate

Joe N style alignment, where instead of pins it uses the anchor, makes it much easier to cutout. Just make sure to apply pressure towards the anchor2 corner while screwing it down. The bolt needs a M14x1.00 thread to secure the chuck from…

Order a print of this model

Printables

HifiBerry Amp 2 / RaspberryPi 3A small upright amplifier

I printed this on a Prusa Mini using Inland PLA+. It's designed to be easy to print. Set the base flat and right side up, supports suggested for the base insets for the rubber feet. Set the cover upside down. Generate supports at…

Order a print of this model

Printables

Kickass 240V Portable Air conditioner - Upright hot air outlet adapter

Kickass portable A/C adapter that allows the hot air outlet flexible hose to come out from the top of the unit. It helps save space behind it, allowing to place the unit in small areas, such as caravans, vans, and cars. Printed with PLA,…

Order a print of this model

Printables

Cat Sitting Bookend, Tail Curled, Heavy Base, Holds Books Upright, - 3D Printable STL File

A unique 3D printable creation — this Cat Sitting Bookend, Tail Curled, Heavy Base, Holds Books Upright, Cute Design Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…

Order a print of this model

Printables

Gambody Interstellar Ranger Stand (wall/upright)

Made this for my own poster. Will attach it on top of the poster with the gambody ranger model. Works also almost as normal stand but front heavy. Printed 3 walls and 0.24mm layer height. Normla infill. Need some supports. Added some more…

Order a print of this model

Printables

Modular honeycomb moss plant support - hold your plants upright!

Printed in PLA. Recommend giving it some manual brims to make sure it doesn't move around during printing. No supports needed. It's fully modular - in a sense that you can stack multiple vertically! It also supports zip ties to tie your…

Order a print of this model

Printables

An upright laptop stand

A laptop stand that has ventilation in the shape of hexagons and rectangles. May not fit all laptops due to the slot size. I'm pretty sure printing on its side reduces supports, but you can try printing in other ways if this is not good.

Order a print of this model

Printables

Upright Business Card Holder - remix

Classy upright card holder with finger drop

Order a print of this model

Printables

Dirt Devil Power max pet upright vacuum wand release clip

Order a print of this model

Printables

Upright Laptop holder/suppport

Works for laptops up to 23mm thick (bottom bumpers included). Temps are better and it takes up less space on the desk. No supports needed .zip file contains the .prt file for full customisation (Creo Parametric) I recommend adding anti…

Order a print of this model

Printables

Cricut vinyl roll holder, upright, easy viewing and holds 25 rolls!

I made this for my wife to hold her cricut vinyl rolls. Each row progresses up for easy viewing. Holds rolls with diameter up to 2.2” so the standard rolls and the slightly larger ones as well. Holds 25 rolls! Hope you like it and it…

Order a print of this model

Printables

Simple upright dual WAGO 221-415 holder

Simple upright WAGO holder for 5-way 221 wago. Upright to save space but levers still very accessible M3 screw to secure to base. VHB tape also works Voron print settings

Order a print of this model

Printables

Fractal Design Define 7 XL Upright GPU mod

Edit: This likely works with most other cases with radiator/fan rails on the top (140mm) and the adapter block supports most GPUs with 3 or less brackets. I built a new workstation with air-cooled GPU. I was saddened when I noticed I…

Order a print of this model

Printables

Upright Girdfinity Card Holder

Order a print of this model

Printables

Tamiya Super Avante Rear Upright

A disappointing outing and week waiting on replacements caused me to test my skills at making my own replacement. Hours in tinkercad with nothing but the original part and set of calipers led to this. It's fits, it's on my own TD4, but…

Order a print of this model

Printables

Snowboard upright storage pins

Inspired by Zeyrox's design (https://www.printables.com/model/1014151-minimalistic-snowboard-mount/files). Uses 3m double sided adhesive to mount (similar to what you'd find on the back of a commandstrip) instead of screws. There is about…

Order a print of this model

Printables

Dyson DC25 upright vacuum wand cap, part number: 914114-01

Dyson DC25 upright vacuum wand cap, part number: 914114-01 modified from original design to fit the larger dc25 including cutout/alignment tab. Print tested at .8 nozzle with .4mm height. (.4 nozzle with .2mm provided as well). I like the…

Order a print of this model

Printables

Paper Roll Upright Holder for Kitchen

Order a print of this model

Printables

Pixel Watch 2 & Pixel Watch 3 charger stand (right side placement to allow for upright screen)

Pixel watch 2 and 3 charger pins are uni-directional thus if you get a right hand side stand, the placement of your pixel watch will be upside down. This model runs the cable around the frame and allows for your watch to face the right…

Order a print of this model

Printables

Kärcher SC 3 Upright lid

When I briefly set the Kärcher down while mopping, it tipped over and the cap broke off. If the lid isn't sealed properly, the water unfortunately splashes out. Hence, a relatively simple replacement model to print. The original seal is…

Order a print of this model

Printables

Gridfinity Bin Bar Adapter for Global Industrial Uprights

I made this bracket to adapt to a Global Industrial upright bin rail. I like to use this tray along with the upright bracket. https://www.printables.com/model/361287-gridfinity-tray-for-ikea-samla

Order a print of this model

Printables

Ryobi RY25AXB Gas Powered Jet Blower Upright Stand

While rebuilding the turbine section of the blower it was too easy to tip over standing on the end. I made this piece to give it the support it needed for me to work on it. This support piece can be easily added and removed. Can be used…

Order a print of this model

Printables

Gridfinity tall divided bin to hold pen/pencil/small tools upright, with magnet holes

1x1x10 gridfinity bin with glue-in magnet holes on the bottom. It is divided into four sub-bins. The walls have small hexagonal holes. They turned out looking like circles on mine, though.

Order a print of this model

Printables

Upright light weighted base

A replacement weighted base designed for an upright light originally bought in the UK from a store called Dunelm. The plastic original went brittle and broke apart, leaving a mess of concrete filling on the floor. I've tried to make an…

Order a print of this model

Printables

Raspberry Pi Camera v2 Upright Mount with Cable Routing for Bambu X1/P1

I remixed Holger's raspberry pi cam mount so the camera would be situated right side up which eliminates the need to flip the image in software to see the feed in the correct orientation. Since I needed to have the cable coming into the…

Order a print of this model

Printables

Rapid Racking 2 - Plastic upright foot

This is replacement foot for the blue uprights used for Rapid Racking 2 series racking. It can probably be used for other brands which all look the same! I would suggest you assemble the rack first and then add the feet to stop them from…

Order a print of this model

Printables

Sleek and upright-friendly Bomb Busters Insert

This insert stores the basic components of the Bomb Busters game, while the advanced components are stored in their cardboard boxes. It is designed so that the box can stand upright without the need for lids. The model features a special…

Order a print of this model

Printables

Interlocking Upright Interlocking Filament Storage Plates

If you have shelving and want to stand up your filament without it rolling away this is the solution for you! Available in 2 different lengths, 64 and 128mm, this design requires no supports and prints well with 10-15% infill.

Order a print of this model

Printables

MMS 90 Degree Upright Mounts

90 Degree upright mounts for the MMS Collection! Can be used upright, or inverted to reorient a mounting point downwards! Combine with other MMS Modules! You'll want some mounts to use this with! -=|Moonbeam Mounting System Collection|=-…

Order a print of this model

Printables

UpRight - dampers adjustment jig

You will need a magnet 40x10x7 (6x) - holding force approx. 9kg. 6x screw (worm or threaded rod) 3x25, threaded insert M3x5,6mm

Order a print of this model

Printables

Goonies pirate coin (thicker, upright with stand)

i put both halves of the coin together, added a middle layer, reduced the depth of the minting and added a stand. Print upright with copperfill, age it with vinegar or ammonia. have fun! ++ UPDATE ++ Added one with no stand for custom…

Order a print of this model

Printables

Flexispot treadmill upright stand

Although on their website the Flexispot treadmill is shown being stored upright, the instructions state that resting it upright can damage the product. I believe this is because the power switch and socket stand slightly proud of the end…

Order a print of this model

Printables

MMU3 Buffer: colored, covered, upright

If you don't want to access your MMU buffer from behind but from above, this is exactly the right thing for you. In this version the buffer has been rotated 90 degrees so that the cassette slot is on the top . This has the great advantage…

Order a print of this model

Printables

Upright hollow printable Numbers / Digits

They are kind of stencil digits, but without the usual similarity to military stencils. Usable as lantern plate, key ring and much more…

Order a print of this model

Printables

nicotine pouch upright stand

Vertical stands for standard size nicotine pouch tubs in a 1, 2, 3 and 4 configuration Nicely tidies up desk space Originally designed just for VELO, but have confirmed they fit Zyn, Killa, nordic spirit and, thanks to…

Order a print of this model

Printables

Pixel 8 Pro Upright and Tilt Stand for photography/ video recording

This 2-piece 3D model combines the functionality of two things: your desk phone stand, and a small tripod. Pixel 8 Pro is too heavy for small tripods, so I created this to hold the phone upright when capturing photo/video. It takes up…

Order a print of this model

Printables

Fox Standing Upright

A cute standing fox for any occasio. Print Settings .16mm layer 3 walls 10% infill in tail 40% infill in body Tree supports

Order a print of this model

Printables

Shaving Bowl with magnets for storage upright

I was on the lookout for shave bowl, and loved the simplicity of this one. But when I stored it in my medicine cabinet, everytime the door opened it would jump out. So I added a block on the side so. I can insert magnets and store it…

Order a print of this model

Printables

Upright Phone Stand for Wireless Charger

The pocket in the stand was modeled for the Anker 313 wireless charger, but should work for just about and pad type charger with 100mm diameter and about 6mm thickness. Printed from Overture PETG at 0.30mm Draft with Organic supports for…

Order a print of this model

Printables

Upright Safe for Playmobil Diorama or Dollhouse

Upright Safe for 1:24 Playmobil Diorama scale or 1:12 Dollhouse scale. Reduced print speed to 80% of max. Printed in Creality gray PLA with no brim. The infill did not print for me, so I had to add standard supports for the interior.

Order a print of this model

Printables

R2D2 Google Home Mini Upright

I really like the original design by Simomura, but found that I couldn't see the top lights of the Google Home Mini when interacting with it. My Home Mini sits by the TV and the angle of the R2D2 pointed the lights away from my viewing…

Order a print of this model

Printables

RSA Token Holder Upright (Platform)

There are a number of RSA token holder prints available. Most of these tilt the token upward. These are useful if the token is sitting on your desk, below eye level, but my token sits on top of my monitor (using Adjustable Monitor shelf -…

Order a print of this model

Printables

RSA Token Holder Upright (Clip)

Order a print of this model

Printables

4v or USB Lithium or INKZALL Large marker 10x upright holder

Holds … - Ryobi 4v batteries - Ryobi USB Lithium batteries - Milwaukee INKZALL Large markers … or in the middle … - Ryobi quick change hobby knife - Sharpie ultra fine retractable marker - Ryobi fine point permanent marker Optionally…

Order a print of this model

Printables

Tamiya TT01 Rear Uprights [Toe, Camber adjustable]

Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…

Order a print of this model

Printables

E-Revo 1/16 Upright

This is printed replacement for the Mini E-Revo 1/16 front and rear uprights / steering knuckles. It uses threaded Nuts to set the backlash of the spherical upper and lower wishbone joints. Take care that you dont overtighten the nuts to…

Order a print of this model

Printables

Upright Laptop Stand

A simple fast laptop stand to hold a laptop upright.

Order a print of this model

Printables

Sideways or Upright Phone Holder

This phone holder is designed to sit on the edge of a table or desk. You can also get more angle on it if you push it off the lip. The files are included to make it the length you need for your phone and the depth with a case or without.

Order a print of this model

Printables

Gilbert Engineering Upright Singing Bulbs 46" Half bracket

Gilbert Engineering Upright Singing Bulbs 46" Medium Cut in half to have one side for single pole mount.

Order a print of this model

Printables

Upright laptop stand

laptop riser stand to hold laptop at the right height to work with separate monitor.

Order a print of this model

Printables

upright phone holder - with holes for charger

upright phone holder with two holes that allow you to charge your phone while upright

Order a print of this model

Printables

Carvera Upright Chuck Subplate

Order a print of this model

Printables

older model westinghouse upright freezer shelf mount

This older model (2006) Westinghouse side-by-side fridge-freezer used fairly simple wire racks in the freezer, and used a rather simple mechanism to seat them, which I have replicated roughly. Printed at the face of the angle, so that the…

Order a print of this model

Printables

Upright Magnetic Snapper

A standard size magnetic snapper, but upright. I needed one so i've mixed the one from Egg Plane Man. Now you don't have to create or mix it yourself. Take a standard snapper apart (you'll only need the magnet with the attached metal…

Order a print of this model

Printables

UPRIGHT IPAD STAND

ipad stand for ipad pro with case RESIZE Y TO 50 WITH UNIFORM SCALE

Order a print of this model

Printables

12 inch upright caliper holder

I used 3 walls 20% infill PLA

Order a print of this model

Printables

Upright Stem Drying Rack with Tubes for Flowers Herbs and Plants MineeForm FDM 3D Print STL File

https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models

Order a print of this model

Printables

Upright Gridfinity Plate Holder – 5 Slots - 2×4

Who hasn't experienced it? You have already printed one or more plate holders. But now you need something else or something bigger. That's how I felt now that I'm using the Gridfinity system. That's why I took a Gridfinity base from…

Order a print of this model

Printables

Replacement Canister clip for Shark Navigator upright vacuum

Replacement canister clip designed for my Shark Navigator® upright vacuum... Carefully push out the pins with a small P

Order a print of this model

Printables

Shark upright vacuum - gasket set for canister seals

The true power of 3D printing is when we create and share our ideas with the world. The Shark vacuum canister is sealed with some foam-rubber type of gaskets. They fall apart in short order. I can't find replacements, so I decided to…

Order a print of this model

Printables

Upright Circuit Board Mount

Self explanatory. Might be good to parameterize such a thing, but I am not experienced in using OpenSCAD. Maybe someday. My thanks to https://www.thingiverse.com/3DPartsMfg/about for the original. Print Settings Printer Brand: Prusa…

Order a print of this model

Printables

ESP32 Audio Kit Upright Housing with Magnets

Modified version of Stens Esp32 Audio Kit Housing which allows the esp audio kit to be stored upright for a better wifi connection. The magnets help to secure the case on magnetic surfaces like an audio amp for example. I the esp32 audio…

Order a print of this model

Printables

Miniature Upright Piano with Candles

This high-detail miniature features floor pedals, easy to print bottom, and countless details! I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.

Order a print of this model

Printables

Replacement mount for Lasko upright fan

This is a replacement for the thin (and apparently fragile) lower mount for certain upright Lasko fans. It's thicker than the original and still allows the fan to swivel up. It uses all the original fan hardware.

Order a print of this model

Printables

Upright spool holder for QIDI Plus 4

A spool holder for direct feeding of the filament into the printer head. It is installed on the place of the standard handles for carrying the printer. The holder's stands can be used like carrying handles if they are fixing with screws…

Order a print of this model

Printables

Upright Stand for Wera Metric Hex Plus L Key Set

This stand makes the hex set take very little space on your workbench. Print in PLA for rigidity.

Order a print of this model

Printables

Power Strip Uprighter

Could use double sided tape to keep it stuck to desk, but I haven't needed it yet. I leave the bottom row of plugs empty as this tray will cover that row.

Order a print of this model

Printables

Laegendary Thunder Truck Upright

Replacement Upright for the Thunder RC truck. Left and right sides available. You may have to ream out some of the holes depending on your printer settings.

Order a print of this model

Printables

Akaso Ek 7000PRO upright holder

Das Model ermöglicht es die Akaso ek 7000PRO hochkannt an einem Go Pro oder ähnlichem Halter zu montieren. Unten an der Seite sind ausschnitte für Mikrofon und Hoch| Runter Taste. Am besten druckt man das Gehäuse mit der front auf der…

Order a print of this model

Printables

Akaso Upright Holder (Vertical)

Vertikaler halter Für die Akaso EK 7000Pro. Am besten Mit 3 Wandlagen Drucken so ist es stabiler.

Order a print of this model

Printables

Dachshund in Cartoon Style – Upright Sitting Pose

🐾 Dachshund in Cartoon Style – Upright Sitting Pose This 3D model features a dachshund puppy in a playful cartoon style, captured in an upright sitting pose – with front paws raised as if begging for a treat or ready to perform a trick.…

Order a print of this model

Printables

VzBot 235 AWD CNC mounts for 2040 extrusion uprights.

VzBot 235 AWD CNC mounts for 2040 extrusion uprights. Files Included. The full motor mount assembly with the printed parts installed, showing how the final installation should look. Both f3d and STEP format. Printed Parts, STL's. Also now…

Order a print of this model

Printables

Moulinex Cookeo Lid Holder – Fix for Broken Hinge / Keep the Lid Upright

This 3D printed accessory was created because the hinge on my Moulinex Cookeo broke. Without support, the lid wouldn’t stay up and always fell down when I tried to remove the pot. This holder keeps the lid slightly open and upright,…

Order a print of this model

Printables

2kg Filament Spool Upright Shelf Storage Block

Lengthen the size to fit a 2kg spool.

Order a print of this model

Printables

vertical / upright stand for Hoymiles solar inverter (800W)

Summary With the help of this stand, a Hoymiles 800W inverter can be positioned upright and at a slight angle. This reduces the space required and improves heat dissipation, especially in summer. Tool-free installation – no screws…

Order a print of this model

Printables

Mast Fold Pro 2 Holder - Upright batteries

I marked this as a remix even though i designed it from the ground up as i was inspired by @Mor_Makes design. I wanted a gridfinity holder for this tattoo machine that allowed the batteries to be charged while they were still in place.I…

Order a print of this model

Printables

Dime Cartridge 2 Gram Upright Stand

I originally downloaded this model: https://www.printables.com/model/533461-vape-standhttps://www.printables.com/model/533461-vape-stand but it didn't quite fit my needs as I had several Dime 2g disposable vapes that I wanted to stand…

Order a print of this model

Printables

AR15 80% Lower Milling Upright Jig for Drill Press

Description Unfortunately, after years of supporting Thingiverse, it has become obvious that MakerBot is not interested in supporting designers who post there by fixing the problems with their site. I am joining the host of other…

Order a print of this model

Printables

CCG TPU Upright Lower

The original make was designed to use a length of PVC plumbing pipe as the crossmember. I encountered photos of a build which used metal bearings on a roller assembly. Before I could chaise down any information, I designed and printed my…

Order a print of this model

Printables

Incense Holder Square Upright

Just a simple Incense holder that will have a place where the ashes could land.

Order a print of this model

Printables

Laptop Upright Stand

Similar to many other laptop stls out there, but with more hexagons. They're the bestagons

Order a print of this model

Printables

Upright Stem Drying Rack with Tubes for Flowers Herbs and Plants StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Order a print of this model

Printables

28mm DND Fierce Upright Enraged Dragon Guardian Fantasy Mini StarForge Kits 3D Print STL File

Order a print of this model

Printables

28mm DND Upright Dragon Ruler of the Mountains Fantasy Mini StarForge Kits 3D Print STL File

Order a print of this model

Printables

Upright Stem Drying Rack with Tubes for Flowers Herbs and Plants StarForge Kits 3D Print STL File

Order a print of this model

Printables

28mm DND Fierce Upright Enraged Dragon Guardian Fantasy Mini StarForge Kits 3D Print STL File

Order a print of this model

Printables

28mm DND Upright Dragon Ruler of the Mountains Fantasy Mini StarForge Kits 3D Print STL File

Order a print of this model

Printables

Drag chain for a OpenFlexure upright microscope

We designed this drag chain intially for integration in our OpenFlexure build of a upright high-resolution microscope . The connectors there are adapted to the OpenFlexure microscope geometry. The drag chain modification description and a…

Order a print of this model

Printables

PI CAM ribbon track upright 3 sizes

Using a pi cam? Need to run a long ribbon around your printer? Why not use a track? 3 sizes 50, 100, and 150mm Use either double sided sticky back plastic or tack Category: 3D Printer Accessories

Order a print of this model

Printables

Gilbert Engineering Upright Singing Bulbs 46" Medium

Mount for the Gilbert Engineering Upright Singing Bulbs 46" Medium. Designed for 1/2" EMT. Works with many other props like IMPRESSION North Pole sign with Matrix. Category: Other

Order a print of this model

Printables

Upright Dock - Alley Cat - LILYGO T-BeamSUPREME - Meshtastic

Designed to be used with the Alley Cat LILYGO T-BeamSUPREME Case: https://www.printables.com/model/705817-lilygo-t-beam-supreme-ts1-case-by-alley-cat Super Glue this small USB C extension: https://a.co/d/59yoYYs

Order a print of this model

Printables

Bucket Handle Stay Upright Clip

Does your task have you constantly picking up your bucket over and over? Keep your handle upright and ready to grab again without bending over so far. The arms can be bypassed easily by pushing the wire handle loop over the arm. Also, the…

Order a print of this model

Printables

Upright IPhone 15 Pro MagSafe Charger Stand

Fully supported MagSafe charger stand for the iPhone 15 Pro. Doesn't hang the phone in the air on just magnets, on the downside however, it's tailor fitted to only the 15 pro.

Order a print of this model

Printables

Upright IPhone 15 Pro MagSafe Charger Stand

Fully supported MagSafe charger stand for the iPhone 15 Pro. Doesn't hang the phone in the air on just magnets, on the downside however, it's tailor fitted to only the 15 pro.

Order a print of this model

Printables

Elegant Upright Cat

Order a print of this model

Printables

Upright plant support

I made this support in 10 mins for a small plant that was leaning over. I included two models, one with a spike, and one without. If you want to increase the length or modify it, I have included the .f3d files. I printed it at 0.12mm (so…

Order a print of this model

Printables

Uprights for Bambu Labs AMS 2 for use with 3dFusionLabs AMS Hinge Flipper

Uprights for Bambu Labs AMS 2 / H2D for use with 3dFusionLabs H2D AMS Pro2 Hinge Flipper Project. Designed to fit the above mentioned project with the newer AMS. Recommended to print flat on the build plate in your choice of higher temp…

Order a print of this model

Printables

PET 150 cl Bottle Holder. Upright or upside down!

Print two, cut a bottle in half and place one upright and one upside down. Use it for any purpose! E.g. screws and nails that can't be used anymore!

Order a print of this model

Printables

Yamaha Upright Piano Lid Key

A key for Yamaha piano lid lock. The Full version can't be printed with FDM printers. Please use the Flat version if you want to print with FDM. Category: Music

Order a print of this model