Withings Scanwatch charging stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple stand to keep your watch charger ready to go.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 111
- Makes
- 3
- Views
- 898
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
Two part model, print the “ring” and “foot”.
The ring which holds the charger itself snaps into place. Due to draft angles on the charger itself this can be tricky to put in, take your time to not break it. Once it is in it will hold very securely.
No supports needed for the ring, the foot prints with supports.
Consider using finer layer height (0.2mm or lower) to get the star shape connector at fine resolution. This allows you to attach the ring at angle you like. Add superglue to hold it securely if you like, but it doesn't rotate even without it.
Optionally you can put in magnets (up to 14mm radius and 4mm thickness) in the bottom and glue them in using the caps.
Onshape file: https://cad.onshape.com/documents/d5cd2eb5b9af8931570a509f/w/c1b0fbd6ec191d5923b3063e/e/ca648173daca7bbb62952313?renderMode=0&uiState=63e7f619c770a94dde56aee7