IKEA Tisken suction cup cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement cover for the suction cup behind an IKEA Tisken suction hanger.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Tisken hangers are awesome, and quick to use.
On the correct surface, they hold and hold on well.
Not all Tisken hangers are meant to be stuck forever. Sometimes, the covers are lost, and you can't cover the Tiskens you remove (Speaking for a friend. I swear.).
Leaving the back without its cap means the silicone suction cap gets dusty, and less sticky.
This will take 20-30 mins to print depending on settings, and should fit back onto your Tisken suction cup.
It was deceptively hard to finetune, but it works for now.
It takes a moment more care to place onto the cup than the original, but stay on good enough that it won't shake off easily by itself.
Printed in PETG, but I guess there's not much of a difference in what you print it out of.
Happy printing!E:\Downloads\SHARED\Tisken cover.jpg