Assassins creed key holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Assassins Creed key hanger
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Key hanger with a motive from Assassins Creed (Altair Ibn-LaAhad). I tried to create a model so that it could be printed in color even without the AMS module. The hangers do not need to be glued, they fit together, you just need to use a little more force. The board can also be connected to the figure without using glue. The only thing that needs to be glued are the hands and fingers (it takes about half an hour) - I hope this does not discourage you and that you will forgive me :) I hope you like the model. Enjoy.
IMPORTANT - the board MUST be printed with supports because of the pins. I recommend printing hooks with at least 50% infill.
Printed on Elegoo Neptune 4