1 / 2
Camper RV Water Heater Drain Plug Wrench — zdjęcie 1
1 / 2

Camper RV Water Heater Drain Plug Wrench

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

7,53 € – 9,20 € netto (bez VAT)

Dla pliku: Camper Water Heater Drain Plug Wrench_0.4n_0.15mm_PETG_MINIIS_7h48m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 8,36 € netto (środek widełek).

Masa podana przez autora
125 g
Czas druku podany przez autora
7,79 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This is a handy lightweight tool for removing your 1 1/8 inch RV camper hot water heater drain plug.

Ocena
0 / 5
Polubienia
13
Pobrania
75
Wydruki
0
Wyświetlenia
437
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This is a tool to tighten or loosen a travel trailer camper hot water heater drain plug. Works with 1 1/8" hex head drain plugs. 

When printing, be sure to have extra thick walls. I used PETg with 10 layers of thickness on the walls giving me about 4mm of outer shell and the socket end is solid. You'll want this so the tool holds up to use. I printed mine with a .4mm nozzle and 0.15 layers which took a long time (Almost 8 hours) but you could use a larger nozzle and thicker layers since this isn't a beauty piece.

Tagi