Camper RV Water Heater Drain Plug Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.53 – €9.20 net (excluding VAT)
For file: Camper Water Heater Drain Plug Wrench_0.4n_0.15mm_PETG_MINIIS_7h48m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.36 excluding VAT (range midpoint).
- Weight reported by the author
- 125 g
- Print time reported by the author
- 7.79 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a handy lightweight tool for removing your 1 1/8 inch RV camper hot water heater drain plug.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 75
- Makes
- 0
- Views
- 437
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a tool to tighten or loosen a travel trailer camper hot water heater drain plug. Works with 1 1/8" hex head drain plugs.
When printing, be sure to have extra thick walls. I used PETg with 10 layers of thickness on the walls giving me about 4mm of outer shell and the socket end is solid. You'll want this so the tool holds up to use. I printed mine with a .4mm nozzle and 0.15 layers which took a long time (Almost 8 hours) but you could use a larger nozzle and thicker layers since this isn't a beauty piece.