Automated Door Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Door lock slider mechanism for use with a mini servo
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I always wanted an amazing spiderman style door lock for my room, so I built a basic rack and pinion mechanism to work with a mini servo to slide it up and down.
Modify the diameter of the end of the rack to fit the diameter of the pin on your door lock.
I personally use it with a mini servo connected to an ESP for ESPhome to work with my Home Assistant.
Red - 5V(Vin)
Brown - Ground(GND)
Orange - PWM(Any PWM pin on an ESP or other microcontroller)
Slide the rack in and keep the servo at the lowest position(0 degrees) and then calibrate it by testing manually what the highest position is for locking the door.
For any further questions and help building this feel free to reach out to [email protected].
A big thank you to the Makerspace at Ashoka University for help with the skills and know-how to bring to life this project I wanted since my childhood and I hope this makes it easier for people out there to build their own.
Material: PLA
Layer Height: 0.2mm
Supports: None