ReoLink POE RLC-843A camera base adapter mount (108mm to 128mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reolink RLC-843A outdoor POE security camera base adapter mount with O-rings.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this adapter mount to make it simple to install the ReoLink outdoor POE security camera in the location of my older security cameras. The older cameras had a 108mm base, but the new ReoLink RLC-843A have a 128mm base mount.
Update July 21, 2025 8:40pm EST - Replaced the “bottom O-ring” STL file with a taller version as the original was too short in height.
Printing Instructions
[BODY]
- Print with ABS, or other outdoor stable material
- 6 walls (perimeters)
- 25% infill
- 5 top layers
- 4 bottom layers
- I printed with a 0.6mm nozzle and it printed perfectly. (Use the nozzle that you wish.)
[O-RINGS]
- Print in TPU
- Print with solid infill
Additional notes
- Base has 4 screw holes to match up with the 108mm security camera base mount
- Base 4 screw holes support M3 screws
- Top of adapter accepts the screws supplied with the ReoLink camera kit.
This security camera installation was very easy once the adapter is installed over the smaller base.
Good luck.