1 / 14
ReoLink POE RLC-843A camera base adapter mount (108mm to 128mm) — image 1
1 / 14

ReoLink POE RLC-843A camera base adapter mount (108mm to 128mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Reolink RLC-843A outdoor POE security camera base adapter mount with O-rings.

Rating
0 / 5
Likes
1
Downloads
55
Makes
0
Views
431
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this adapter mount to make it simple to install the ReoLink outdoor POE security camera in the location of my older security cameras. The older cameras had a 108mm base, but the new ReoLink RLC-843A have a 128mm base mount.

 

Update July 21, 2025 8:40pm EST - Replaced the “bottom O-ring” STL file with a taller version as the original was too short in height.

 

Printing Instructions

[BODY]

  • Print with ABS, or other outdoor stable material
  • 6 walls (perimeters)
  • 25% infill
  • 5 top layers
  • 4 bottom layers
  • I printed with a 0.6mm nozzle and it printed perfectly. (Use the nozzle that you wish.)

[O-RINGS]

  • Print in TPU
  • Print with solid infill

 

Additional notes

  • Base has 4 screw holes to match up with the 108mm security camera base mount
  • Base 4 screw holes support M3 screws
  • Top of adapter accepts the screws supplied with the ReoLink camera kit.

This security camera installation was very easy once the adapter is installed over the smaller base. 

Good luck. 

Tags