Wall Hook – Simple and Strong
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal wall hook with press-fit design. Great for cables, towels, or bags.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple and sturdy wall-mounted hook, designed to hold various items like cables, towels, bags, or bathroom accessories.
It consists of two interlocking parts: the hook slides securely into the back plate.
Printed in PLA, it works great for indoor use.
For outdoor use or hot/humid environments, PETG or other weather- and heat-resistant filaments are strongly recommended.
📏 Dimensions:
Back plate: 6×6 cm
Hook arm: 7 cm long
Vertical stop: 6 cm tall
Thickness: 2 cm
🛠 No supports needed.
🧩 The hook inserts manually into the plate after printing.
💪 Infill: recommended 25–40% or more.
🔩 Can be fixed with adhesive or screws (holes not included, can be drilled if needed).