1 / 5
Vintage Pioneer SG SA Amp and Equalizer Parts — zdjęcie 1
1 / 5

Vintage Pioneer SG SA Amp and Equalizer Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made these as a replacement for my very worn SG-9500. They should fit other models too

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

I made these as a replacement for my very worn SG-9500. They should fit other models too

You can try giving The parts for the switch a better finish with paint or just leave them the way they are. I recommend using a very fine print resolution. Be careful with the extenders for the broken off sliders, they are made to be used with glue. I used superglue but you should shield off the Front panel with e.g. Tape or it will leave white marks, you would have to clean with Aceton The replacement for the rubber part, that holds the Lightbulb is designed to be printed stiff but i think you can use flexible filament.

Aceton, Alcohol and Electronics Cleaner definitely were my best Friend while on this Project. I got this EQ in very bad shape and it was covered in thick, yellow tar from a smokers household. I am not a Professional but if you have questions or tips, feel free to ask!

Category: Other

Tagi