Card Sleeve Stack 2 versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stacker for loading up multiple card sleeves
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend was looking for something to help with ripping packs of collectable cards. The goal was something to hold stacks of top loaders and penny sleeves so everything is sized around those two sleeve types.
The stacking works simply by sliding one into the top of the other so print as many as you need to and stack them up.
The top loaders I have are sized at 1.7mm thick so the gap is 2.0mm allowing you to pull out the bottom one without pulling the rest of the stack. The penny sleeves are easier and pulling out the top one at a time should work unless you've got ultra dry fingers.
Also created an additional part for envelopes to load into that will interlock with the original version. Added screw mounting holes on all of them for wall mounting.
ALSO also, added alternate version in three different pieces. This version stacks the top loaders above the penny sleeves and allows the envelopes to lay fully flat.