AnkerMake M5C Blink Mini Build Plate Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount that fits under the build plate of the M5C for a Blink Mini camera. It should work with the Mini and Mini 2
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mounts under the build plate and contains a mount for a Blink Mini camera. You will need to print this in PETG (or stronger) because PLA will begin warping before the plate fully heats up.
I found that it was difficult to install if I just unscrewed the front two screws, so I removed one on the back and loosened the last one. This allowed me to swing the heat plate back and then I could pop the mount over the exposed screw holes.
I forgot to take a picture before I mounted it, but you can look at the previous iteration if you're curious how it looks.