AnkerMake M5C Blink Mini Build Plate Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount that fits under the build plate of the M5C for a Blink Mini camera. It should work with the Mini and Mini 2
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mounts under the build plate and contains a mount for a Blink Mini camera. You will need to print this in PETG (or stronger) because PLA will begin warping before the plate fully heats up.
I found that it was difficult to install if I just unscrewed the front two screws, so I removed one on the back and loosened the last one. This allowed me to swing the heat plate back and then I could pop the mount over the exposed screw holes.
I forgot to take a picture before I mounted it, but you can look at the previous iteration if you're curious how it looks.