1 / 3
58mm Victorinox "Alox" Scales (too thin for scale tools) — zdjęcie 1
1 / 3

58mm Victorinox "Alox" Scales (too thin for scale tools)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Make your own Alox Rambler! Thin scales that snap right onto the rivets of a standard 58mm Victorinox.

Ocena
0 / 5
Polubienia
6
Pobrania
35
Wydruki
0
Wyświetlenia
381
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

These thin scales don't have the benefit of the strength of Alox scales, AND you lose the scale tools!  But they still look pretty cool.  They print best with one wall and 100% infill.  They stand 1.2mm tall with the cross cutout at 0.6mm, so printing at .2mm layer thickness works perfectly.  I've been dropping the model by -0.2mm and making them only five layers high.  PLA works best, as harder materials are too rigid and take a lot of effort to get them to snap on over the rivets.

Tagi