120mm Fan Solder Fume Extrator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple attachable carbon filter for a 120mm case fan
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 77
- Wydruki
- 2
- Wyświetlenia
- 969
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I designed this because I wanted to be able to solder indoors during the winter, but didn't want to open the window to let out fumes for obvious reasons. The bracket attaches with 4 screws that go through the filter bracket and funnel and mount into the fan itself.
The ‘filter bracket’ part is designed to fit this activated carbon sheet, a square 5 1/8" on either end and 3/8" thick. However, the step file is included if you want to modify it for a different size.
No stand is included for this design. Mine was mounted to a thick ‘Minuteman Circulating Fan’, which was able to hold itself up, however you might need an alternate mounting solution.