HRTH Mount - Molle Mounting System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of adjustable plates that allow you to mount things to molle.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 151
- Wydruki
- 4
- Wyświetlenia
- 671
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
The HRTH mount was designed to be a versatile mounting system for Molle. Things attached to the mount can be rotated to any of 24 angular positions by just loosening a screw. This is nice for mounting holsters, mag holders, dart holders, etc.
Included in the file set are 2 mounting plates. The standard molle plate is for stuff like bandoliers and chest rigs that have the 1-inch gap between molle strips. The belt molle plate is for those who have belts with 2 strips of molle that have no gap in between them. Also included is a step file of the mating feature so that you can toss it into any designs you would like.
V1.1 Updated 3/31/2026:
- Added a nylock nut to hardware to prevent loosening when jostled.
Required hardware:
- 1 M3 nut
- 1 M3 Nylock Nut
- 1 M3x6 or M3x8 shcs.
Recommended print settings:
Support Material - none
Walls - 10