HRTH Mount - Molle Mounting System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of adjustable plates that allow you to mount things to molle.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 151
- Makes
- 4
- Views
- 671
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
The HRTH mount was designed to be a versatile mounting system for Molle. Things attached to the mount can be rotated to any of 24 angular positions by just loosening a screw. This is nice for mounting holsters, mag holders, dart holders, etc.
Included in the file set are 2 mounting plates. The standard molle plate is for stuff like bandoliers and chest rigs that have the 1-inch gap between molle strips. The belt molle plate is for those who have belts with 2 strips of molle that have no gap in between them. Also included is a step file of the mating feature so that you can toss it into any designs you would like.
V1.1 Updated 3/31/2026:
- Added a nylock nut to hardware to prevent loosening when jostled.
Required hardware:
- 1 M3 nut
- 1 M3 Nylock Nut
- 1 M3x6 or M3x8 shcs.
Recommended print settings:
Support Material - none
Walls - 10