Decathlon HL 900 V2 headlight - repair part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Did your Decathlon HL 900 V2 headlamp holder break? It's a common problem, so I started reverse engineering :)
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 424
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Update added improved variant
I kept the original design, but improved the rigidity and elegance of the shapes. The back is ergonomically shaped to copy the forehead. I paid particular attention to modeling the stops around the joint. I optimized the size so that such a small size could be printed. The stops work perfectly and thanks to this the headlamp can be positioned well. Better than the original part :)
I also increased the rigidity of critical parts and strengthened the wall thickness and created a smoother transition in the corners.
The printing profile is ready for PLA. I recommend using the tougher PLA + or PLA Rapid / HS or PETG. I tested the model on more than 15 prints and tuned the smallest details. It fits perfectly in terms of dimensions.
!!! It is necessary to print a layer height 0.16 mm or 0.12mm, 18% Gyroid or Cross Hatch , 3 - 4 perimeters and Arachne !!!
Strap mount:
