Round Guitar Control Knob - CTS 24 spline WIP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Work in progress, volume/tone control knob for guitars with 24 spline posts. CAUTION: Extremely sensitive to settings.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
CAUTION:
This print is very sensitive to materials and print settings. If the fit is tight, do NOT force it onto the post and risk damaging your pot control.
It's a small print, so better to tweak settings and try again! Very small resize or hole compensation values are probably the best fix. Infill percent and pattern will also make a difference as to fit.
I printed in “transparent” PETG, at 0.20mm layers with 2 walls at 25% infill. With these settings and this filament, I needed -0.25mm hole compensation for a good fit.
Print as oriented, no supports or brims needed.