Round Guitar Control Knob - CTS 24 spline WIP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Work in progress, volume/tone control knob for guitars with 24 spline posts. CAUTION: Extremely sensitive to settings.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
CAUTION:
This print is very sensitive to materials and print settings. If the fit is tight, do NOT force it onto the post and risk damaging your pot control.
It's a small print, so better to tweak settings and try again! Very small resize or hole compensation values are probably the best fix. Infill percent and pattern will also make a difference as to fit.
I printed in “transparent” PETG, at 0.20mm layers with 2 walls at 25% infill. With these settings and this filament, I needed -0.25mm hole compensation for a good fit.
Print as oriented, no supports or brims needed.