1 / 3
UNW airsoft GBB version of: Unseenkiller Paragon 19X — zdjęcie 1
1 / 3

UNW airsoft GBB version of: Unseenkiller Paragon 19X

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

should be as simple as dropping in the parts

Ocena
0 / 5
Polubienia
19
Pobrania
57
Wydruki
0
Wyświetlenia
450
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

12-10-2025
models are updated so that the slide lock cant be pushed outwards. what causes extra slide ware
this can be fixed with a 0.6mm spacer if you want to update a printed frame

so like mentioned before it's best to use the cut out shapes in your slicer to make this model
-

29-07-2025

I have moved the mag 0.5mm up. this should be better. but this not tested with other users.
How ever with the paragon, with this one was giving me errors. So I have on;y exported a solid frame version so you can apply the cut in the slicer

------__

extra note on this model: I needed to make the pin hole for the front rail a bit smaller to avoid a modeling error. so I made it the correct size for so far I could. and there should be only like 1mm or 2mm that is to tight on each side. with a added feature that you can attach a buttstock on it that is rail mounted.  and it got a optimal optic mount

--

just a cosmetic chance to the lower in this case styled after a design made by UNSEENKILLER what in turn is a remix of IPrintshit's Paragon 9
 

_________________

compatibility note: 
WE-tech G series 19 fom gen 3 up to gen 4 (5 will be added later)
AW VX9: should fit but this is not tested
G-force 19 : should fit but this is not tested
_________________

assembly note:
you might want to look up some videos in case your new to disabling this model of GBB. but it should be same as dissembling and assembling a official one
 

-


additional parts for PCC:
2x M5-25 SHCS
2x M5-40 SHCS
4x M5 Hex Nuts
 

-


additional parts for threaded Rod Stock
4x M3-20 SHCS

4x M3 Hex Nuts


2x M5-30 SHCS
2x M5 Hex Nuts

2x ¼ -20 Hex nuts
1x ¼ -20 threaded rod (trimmed to ~9 Inches )

Tagi