1 / 3
UNW airsoft GBB version of: Unseenkiller Paragon 19X — image 1
1 / 3

UNW airsoft GBB version of: Unseenkiller Paragon 19X

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

should be as simple as dropping in the parts

Rating
0 / 5
Likes
19
Downloads
58
Makes
0
Views
457
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

12-10-2025
models are updated so that the slide lock cant be pushed outwards. what causes extra slide ware
this can be fixed with a 0.6mm spacer if you want to update a printed frame

so like mentioned before it's best to use the cut out shapes in your slicer to make this model
-

29-07-2025

I have moved the mag 0.5mm up. this should be better. but this not tested with other users.
How ever with the paragon, with this one was giving me errors. So I have on;y exported a solid frame version so you can apply the cut in the slicer

------__

extra note on this model: I needed to make the pin hole for the front rail a bit smaller to avoid a modeling error. so I made it the correct size for so far I could. and there should be only like 1mm or 2mm that is to tight on each side. with a added feature that you can attach a buttstock on it that is rail mounted.  and it got a optimal optic mount

--

just a cosmetic chance to the lower in this case styled after a design made by UNSEENKILLER what in turn is a remix of IPrintshit's Paragon 9
 

_________________

compatibility note: 
WE-tech G series 19 fom gen 3 up to gen 4 (5 will be added later)
AW VX9: should fit but this is not tested
G-force 19 : should fit but this is not tested
_________________

assembly note:
you might want to look up some videos in case your new to disabling this model of GBB. but it should be same as dissembling and assembling a official one
 

-


additional parts for PCC:
2x M5-25 SHCS
2x M5-40 SHCS
4x M5 Hex Nuts
 

-


additional parts for threaded Rod Stock
4x M3-20 SHCS

4x M3 Hex Nuts


2x M5-30 SHCS
2x M5 Hex Nuts

2x ¼ -20 Hex nuts
1x ¼ -20 threaded rod (trimmed to ~9 Inches )

Tags