Toenail Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig to insert nails and screws into a 2x4 wall stud at a 45 degree angle.I'm putting a new wall up in the house and…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Jig to insert nails and screws into a 2x4 wall stud at a 45 degree angle. I'm putting a new wall up in the house and need to "toenail" the studs, as there's no room to prefab the wall and nail from the bottom. Without a nail gun that can be quite difficult. This jig has horizontal holes to optionally (recommended though) drill pilot holes for the nail or screw head, and give the tip something to catch. There's also holes on the bottom to optionally brace the jig with some pins if you need to free up a hand. I designed it ergonomically so that it's easy to hold upside down for the top stud.
This model is designed for 4in nails and screws. I have provided the files in 3MF format in case someone wants to remix for other lengths.
Category: Hand Tools