Toenail Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jig to insert nails and screws into a 2x4 wall stud at a 45 degree angle.I'm putting a new wall up in the house and…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 55
- Makes
- 0
- Views
- 391
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Jig to insert nails and screws into a 2x4 wall stud at a 45 degree angle. I'm putting a new wall up in the house and need to "toenail" the studs, as there's no room to prefab the wall and nail from the bottom. Without a nail gun that can be quite difficult. This jig has horizontal holes to optionally (recommended though) drill pilot holes for the nail or screw head, and give the tip something to catch. There's also holes on the bottom to optionally brace the jig with some pins if you need to free up a hand. I designed it ergonomically so that it's easy to hold upside down for the top stud.
This model is designed for 4in nails and screws. I have provided the files in 3MF format in case someone wants to remix for other lengths.
Category: Hand Tools