Tevo / 2020 / 2040 E3D V6 X-Carriage + Hot End Assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to put an E3D knockoff on my Tevo tarantula so I designed an X-Carriage and cooling solution to accommodate…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to put an E3D knockoff on my Tevo tarantula so I designed an X-Carriage and cooling solution to accommodate it.
Required HW:
- 10 M3 Square Nuts
- 1 M3 Hex Nut
- 7 M3x10 Screws (I used hex-head Caps)
- 2 M3X25 Screws
2 M3X30 Screws
The design is tolerant of larger screw lengths in most spots(+2-4mm will work in most cases)Suggest you use 4+ Walls on the X-carriage, mostly designed to print without supports but the "E3d_Fan_Duct_Longer" part requires them over the two screw mounts that jut to the sides and the "E3D_X-Carrage_B" part requires them to support the heat sink cavity.
Print instructions
Category: 3D Printer Parts