Tevo / 2020 / 2040 E3D V6 X-Carriage + Hot End Assembly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to put an E3D knockoff on my Tevo tarantula so I designed an X-Carriage and cooling solution to accommodate…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 41
- Makes
- 0
- Views
- 808
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted to put an E3D knockoff on my Tevo tarantula so I designed an X-Carriage and cooling solution to accommodate it.
Required HW:
- 10 M3 Square Nuts
- 1 M3 Hex Nut
- 7 M3x10 Screws (I used hex-head Caps)
- 2 M3X25 Screws
2 M3X30 Screws
The design is tolerant of larger screw lengths in most spots(+2-4mm will work in most cases)Suggest you use 4+ Walls on the X-carriage, mostly designed to print without supports but the "E3d_Fan_Duct_Longer" part requires them over the two screw mounts that jut to the sides and the "E3D_X-Carrage_B" part requires them to support the heat sink cavity.
Print instructions
Category: 3D Printer Parts