Bouncing PLA Ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prints flat like a petal flower. Bend and snap it together to make a bouncing ball.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Bouncing ball.
Prints flat like a petal flower. Bend and snap it together to make a bouncing ball.
The assembly is pretty self explanatory. Choose the PillarRing with the right tolerance for your printer to achieve a secure snap fit.
The extra lock-ring isn’t required—the ball stays together without it—but it adds a bit more security.
(For reference, I used the 0mm tolerance on an x1 carbon printer.)
Print in PLA with 0.2 layer height - about 25 mins print.
Original model was made by @LostInTech3D
https://www.patreon.com/posts/bouncing-pla-116197272
The assembly of the petal was modified to this ring-pillar snapfit instead of the original snap clips which caused the ring to delaminate during assembly.
TODO: Maybe improve weight distribution to obtain a more natural rolling ball.