Elegoo Saturn 4/Ultra/16k Drip Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build plate mounted handle that also allows for hanging to allow resin to drip
- Ocena
- 3,75 / 5
- Polubienia
- 38
- Pobrania
- 400
- Wydruki
- 5
- Wyświetlenia
- 2229
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a drip bracket integrated into my build plate so that I didn't have to hold the dripping build plate with one hand and try installing the bracket with the other, but the double sided ones that I found didn't have clearance for the S4U 16k build plate handles. This one also tilts the build plate 5 degrees to the rear corner allowing the resin to drain better and allowing you to tilt the build plate that direction during attachment to reduce the chance of dripping outside of your vat. The bracket also allows you to set the build plate upside down on a table.
You do have to remove the handles to install. Reinstalling the handles locks in the bracket into place in addition to the two screws on the build plate.