Flexispot Sit Stand Transmission Rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexispot Sit/Stand desk was missing the transmission rod, so i made one
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I received this desk from a friend, who complained that only one leg would move when adjusting the height.
One look underneath, and i saw it was missing the rod from the left (powered leg) to the right (unpowered).
I used ½ PVC, cut to the lengths that i needed (leaving a few inches of gap for the tension adjustment tube to do it's part), the 3 parts i printed and some screws laying around (you know the little bin we all have… just look in there, and you'll find 8 screws that'll do the job).
the hole in the center of the linkage hex i ran a screw through to ensure strength.