Flexispot Sit Stand Transmission Rod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flexispot Sit/Stand desk was missing the transmission rod, so i made one
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
I received this desk from a friend, who complained that only one leg would move when adjusting the height.
One look underneath, and i saw it was missing the rod from the left (powered leg) to the right (unpowered).
I used ½ PVC, cut to the lengths that i needed (leaving a few inches of gap for the tension adjustment tube to do it's part), the 3 parts i printed and some screws laying around (you know the little bin we all have… just look in there, and you'll find 8 screws that'll do the job).
the hole in the center of the linkage hex i ran a screw through to ensure strength.