1 / 3
Kawasaki Ninja EX250 Front and Rear Blinker Mounts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement mounts I made since the front and rear rubber boots had both rotted away.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Replacement mounts I made since the front and rear rubber boots had both rotted away.
Fit pretty good and allow the fitment of generic aftermarket blinkers.
Any filament will work, but you may want to use something more UV resistant if your bike is stored outside, or give it a coat of paint and clearcoat. PLA has worked fine for me even leaving the bike sitting in the sun but your mileage may vary.
