brim cutter - adjustable - millinery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
adjustable brim cutter for millinery.
- Ocena
- 3 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 478
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
adjustable brim cutter using a slider that locks into place with holes on the side of the cutter and slider. i use a long nail, but a piece of strong wire would work as well
with printing, i stopped at the layer just below the level of the top of the bearings, placed the bearings and then started the print running again.
i set the 11 blade in the groove, used the printed pin to keep the blade from moving up and down, and epoxied the spring (cut) into the inset of the slider.
i had a spare piece of sheet metal i cut to size and smoothed the edges to act as the blade stop to help with cutting/sliding of the brim cutter.
All models made in PETG
below are links to parts i bough from amazon
design created in fusion360. these are for sale on various sites, selling from $50-100. this works well and made for a fraction of the price.
things i would have changed: larger/wider inset for the blade, smaller area or brim curvature
please feel free to share, adjust, change to your needs
Bearing 608: https://www.amazon.com/dp/B0CY4WV1B8?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
craft #11 blade: https://www.amazon.com/dp/B07R4CY826?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
spring: https://www.amazon.com/dp/B0DNMQWN1H?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1