200 modeli
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
The original articulated octopus is extremely hard to print, this one creates rings that act as a partial brim.
A simple tool to bend your hat brim to hold a curve while steaming it!
https://paypal.me/radicalreel Remix of MerganMcFergan's Gizo the spider. I'm not a fan of rafts so i made a Brim which is only partially conneced. I added slight support too source: www.thingiverse.com/thing:5044727
This Friendly Articulated Snail is a remix of thing:4847937 by Nebetbastet which is actually a remix of Isaiah 's Slug. This version just has the protrusion to allow the snail shell to attach. This blender remix allows easy printing with…
This Friendly Articulated Slug is a remix of thing:4727448 by Isaiah that allows easy printing with default settings by adding a simple brim that connects all the parts on the bottom and just peels off once you finish printing. I created…
"Articulated Crystal Dragon by Saber3D" had a few versions, namely the original and an "Updated" set of models that has better/thicker connecting rings. The "Updated" models would not load in PrusaSlicer with the correct multi-material…
Connecting the small parts with a one-layer-high line. This helps to adhere the small starting surfaces to the bed. Much easier to remove than a brim. Prusa project files are available to customize further.
Just "discolored" remix with added brim on selected areas
A decorative "dripping" (or "melting") brim attachable to the original honeycomb wall by RostaP . It's available as a single solid piece (16 hexagons, 333×77×8 mm) and split in 2 parts (8 hexagons, ~170×77×8 mm each) fitting a regular…
Why I remixed it I remixed this one because of a comment I read from DERacing: "I get around the 220 mark and the part snaps away from the glass bed." and exactly the same happend to me and as I couldn't find any premade Temperature Tower…
I did some small changes on the design by Qualith . I did not change the internal dimensions, so you can also use the Knobs from the original design . Additionally I created a frame, so you can use the ice breaking module with the raised…
Model printed in PLA and PETG in Creality Print on the standard "Normal" profile. Layer height 0.2, nozzle 0.4, filling 15%. Brim and support disabled. Pins should be printed separately, Brim and support optional, but not suggested, with…
I couldn't find a good hat hanger out there for a larger brimmed hat. Did a few variations so maybe something works for you - I found the one with a “catch” at the end to be best for larger cowboy style hats. Settings I prefer to do these…
A tool to keep your hat brim in place while you steam it.
Instead of throwing away a favorite pair of sunglasses after an arm snaps off, this model gives them a completely new, hands-free lease on life. This design allows you to securely mount a pair of glasses directly to the brim of any…
This is a copy of another I download But noticed the brim wasn't as wide as it could be & the ash was falling all over the place. Also, the centre hole was too small for the cheap incense sticks I was buying. So redesigned it with a wider…
I had some issues printing this model so I added some brims to the problematic parts.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I have a hat and I needed to bend the brim. So I made an adjustable hat shaper, bill bender, brim curver tool. Quick, easy print, works great, thought I'd share. 0.20mm layers 3 walls 8% infill, Triangles No brim, no support Print time 1h5m
🟩 First and foremost: I’ve worked hard on this, so I’d love to see your creations, folks! 🙏😜 Have you ever lost your deburring tool right when you needed to clean up a print, only to realize a replacement from overseas will take weeks to…
This model is compatible with the lego system.
Brim Curler 12mm Hat Making Tool
Two versions, 6c holds 6 decks of regular, sleeved cards, 5c holds 4 regular decks and larger materials such as the hero and enemy sheets of Shadows of Brimstone. This has been inspired by the Hold-It! card organizer. If you have any…
Billions of years of tectonic forces and magma flow in the making, culminating in your very own sandstone vent. Open source version of https://cosmicjubilee.com/designs/igneous-brim/ - available to buy now! The ridges on this vase are…
Gridfinity 2x3 Cell. This is the most basic unit of the Gridfinity system developed by Zach Freedman. This bin includes a tab for labels and a scoop in the internal angles for easy removal of hardware and small parts.
This is a copy of the original IKEA BRIMNES Plastic Gliding Foot. I redesigned it because I needed different feet heights. If you have a uneven floor like me you can simply print higher or lower feet. I have added also the STEP-File if…
In the past, some photo labs put paper brims on negatives for easier holding. Sadly, this means they are not compatible with the default valoi 360 mask for 35mm film, so I designed this one. Printed on the side with supports, I've printed…
Kali's Insert with Brim in one piece
Brim Curler 9mm Hat Making Tool
Created a few trays/accessories that are compatible with the BrimHart Board Game table slots. All parts designed to print on 225x225x280mm print bed but you can scale the width if you want bigger trays. Have only Printed Small tray and…
HOUSE MAILBOX DOOR NUMBERS AND LETTERS 150mm(height) X 110mm(width) X 2mm(thickness). Resize in slicer as required. Printed on ender 3, ender 3 s1 and bambu lab x1 using PLA Easy to drill into. Make small guiding holes if screwing in.
This model is compatible with the lego system.
I wanted an extended sidebag for token like grit, corruption, bleed and other status effects. There is also a compartment for cards that are not currently in use
Those are simple models. 0.2mm thick mouse ears. You can import them in your slicer and position them in the corner of your project instead of using a brim. It is not as sturdy as a brim, but way simpler to remove.
This model is compatible with the lego system.
I wanted a token tray for a Shadows of Brimstone insert I'm trying to finish up. I only have 40mm of height left to work with so I altered BasHamer's design to make it collapsible. I also removed two of the token shafts, so the trays rest…
MasterSpool Optimisée pour Filament Refill | Optimized MasterSpool for Refill Filament Design amélioré et léger sans compromettre la solidité. | - Improved, lightweight design without compromising strength. Impression plus rapide. | -…
a 20x0.2mm circle to put in the corners of your STL to keep it from warping up too easily. ex printing a box out of ABS. scalable but 20mm is usually enough. useful if your slicer doesn't have this feature or if the settings for it is…
3D Printed Cap Brim Bender - V2 A simple way to make your hat fit better and more comfortably. Simply choose which bend you want (mild or aggressive), insert your hat, and leave for 24 hours.
This model is compatible with the lego system.
The size can be adjusted with the parameters in fusion 360. Just measure the length and width of you hat's headband. After taking your hats measurements I recommend printing the size template in the downloads. Print this in vase mode for…
I wanted a 6 shooter with storage for all the tokens and no accidental slipping of those. Assembled without glue. Print Settings Printer Brand: Prusa Printer: I3 MK3 Rafts: No Supports: No Layer: 0.15 Infill: 15 Filament: Fiberlogy PLA
I made this to prevent the supports from falling.
I needed room and still easy access for the remotes and other stuff we need in a hurry. There's even room for a glasses spray and cleaning cloth! I am really pleased! The picture shows the one and only print I made. I have reworked the…
Not a fan of a flat brim. This forces the issue nicely. Leave it overnight, or longer.
EDITED: A simple correction to the method I describe makes it much more easy: 1. After adding the brim ears, just merge them with the object to be printed. (All about negative part etc, can be skipped). 2. Even better solution: - place a…
A holder to help protect your stack of Shadows of Brimstone Exploration tokens from getting knocked over during game play. Sized for exploration tokens that have been placed inside coin capsules. Bare tokens will probably slip right out.…
Recently purchased the Brimhart Board Game Table from Amazon and the first thing everyone notices is the “cupholders' are really ”can holders, which is fine and all, but for those that don't just pound canned soda and beer, I designed a…
These are scalable ears for corners or small sections of your print. The unique designs allow you to put the ears in spots that can be easily removed. They are approximately 13mm in diameter (0.50") and approximately .5mm thick (0.02").…
I liked the size of the original tray but wanted a way to keep an herb grinder from sliding around, so added a simple circular ridge. As you can tell by the picture I did not need the full diameter of the ridge for my SLX grinder (62mm)…
Gridfinity 1x1 Cell. This is the most basic unit of the Gridfinity system developed by Zach Freedman. This bin includes a tab for labels and a scoop in the internal angles for easy removal of hardware and small parts.
Notes: The part is thin enough (1.5mm) to cause warp if you peel it up too before the temperature goes down. The Gcode has a pretemp of 140° so the bed can reach temperature first. The Gcode provides a raised Z position to allow a moment…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
The exploration tokens in Shadows of Brimstone are kind of a key component but the stack of tokens is easy to knock over so I made this little token holder for them. I like a lot of the other token holders people have made but my group…
Are you ready to trade your heart containers for some serious laser power? This is a clean, 3D-printable model of the iconic Brimstone symbol (Leviathan Cross) from The Binding of Isaac . The back features two pre-designed circular…
This 3mf file allows you to test different brim gaps to find out which peels the easiest without detaching. The text is automatically not included in the final print. Bu 3mf dosyası farklı mesafede kenarlık boşluklarını kolayca test…
Custom Brimstone Valorant Keycaps for Cherry Mx Profile (mechanical keyboards). Make your keyboard more unique! Bundle includes 20 keycaps with different designs. Round type: -4 ability keycaps (outwards) 3D profile (flat surface) -4…
The handle on my Nightstand split, so I printed a new one and I thought I'd share it here. I think I printed it with 25% infill. Support is not needed. The holes aren't quite deep enough, so a power screwdriver or drill is necessary to…
adjustable brim cutter using a slider that locks into place with holes on the side of the cutter and slider. i use a long nail, but a piece of strong wire would work as well with printing, i stopped at the layer just below the level of…
I liked Razorheads daily town event box but I wanted something that could hold the unwanted attention tokens and the devils head as well. So I designed a new one! Mine has two slots for cards, the bigger one fits the town deck sleeved…
I noticed, that the inbuilt brimears in some slicers are far too weak. So I designed some more durable, which can be merged with the model. Included are versions with 0,4 and 0,6 mm height. I recommend the lower one, it is strong enough…
This model is compatible with the lego system.
Storage tubes for Shadows of Brimstone Town Location tokens, for tokens that are held inside 48mm coin capsules. Town Locations Tube - holds the 12 tokens from either Frontier Town or Feudal Village. Barter Locations Tube - holds the 6…
This is a super simple model that goes really well with my vertical Shadows of Brimstone Enemy Sheet holders . This keeps all those faction, tribe, trait, and other similar cards connected to their respective Enemy Sheet, making it much…
Attach a sports ball charm to the brim of your baseball hat 🧢. Choose from the following sports: 🎾 Tennis ⚽ Soccer (European Football) 🏐 Volleyball ⚾ Baseball Printing Tips: Supports are needed A brim is also needed to have enough bed…
I kept bruising my shins on the sharp wooden drawer pulls of the drawers of my IKEA BRIMNES bed. These replacement drawer pulls are smoothly contoured so they won't hurt me. Lightly edited from https://www.thingiverse.com/thing:3911914 My…
This 3D-printable E-ZPass holder is designed specifically for mounting your transponder on your Tesla's windshield, keeping it discreet, easily accessible, and out of the way on the windshield. Perfect for drivers who prefer a clean…
Just import the file into prusaslicer. Settings are included. Place one into each corner.
One of the frustrations with the IKEA BRIMNES bed headboard (https://www.ikea.com/cz/en/p/brimnes-headboard-with-storage-compartment-white-60228712/) was that the charging cable kept falling behind the bed and it was really hard to get it…
These spacers are made to raise the bed off the floor by 25mm, enough so that the storage drawers can be easily used when you have carpets/rugs around the bed. Additionally, they allow the underside of the bed to aerate/breathe,…
The goal was to reproduce known brims model for car. This is result of my work the original model is described here: https://vossenwheels.com/wheel/vps-305/ To print this model you need use low speed and pla or any other material with…
This is a replacement for the rod holder in the ikea wardrobe Brimnes. The best way to print it is with the part that holds the rod facing down. So this way the little cilinders that stiks out the piece it prints quite good. Please, leave…
A full set of 3D letters and characters in Ebrima
Gridfinity 1x1 Cell. This is the most basic unit of the Gridfinity system developed by Zach Freedman.
ENG: Frame for the Sonoff T1 light switch (european version with 86x86mm). the frame is surrounded by a wide brim to protect the wall from nasty fingerprints. should be a snug fit around the T1. Made with Tinkercad. GER: Rahmen für den…
I needed a hook to hang up a clothing such as abathrobe, and this simple print works just fine. It fits the IKEA Brimnes door perfectly. I printed mine in Polymaker PETG, 0.2mm layer height, using a 0.4mm nozzle. PLA also works, but this…
Can print on its side, no supports needed!
I recently became the proud owner of the Brimhart game table (available on Amazon – highly recommended!). The included accessories are solid, but as a 3D printing enthusiast, I immediately saw endless potential for custom upgrades. This…
Warby Parker Brimmer frames
This is a remix of this thingiverse model of replacement feet for the IKEA BRIMNES wardrobe . The main change I made was to add a shallow chamfer to the short sides, to facilitate being slid on carpet. How to print : 3 perimeters w/ 15%…
I highly recommend printing this as the model is oriented, on it’s side, for maximal strength. Use a brim if you’re having problems with adhesion. -If you print it with PETG and with the largest area flat to the bed you will get a…
Mounts an Apple magsafe charger to the headboard for easy access. There's also a few clips to guide the cables neatly to the wall. If you don't have a magsafe charger there's also a version which just clips a cable to the headboard for…
Attach a sports ball charm to the brim of your baseball hat 🧢. Choose from the following sports: 🎳 Bowling 🏀 Basketball 🏏 Cricket ⛳ Golf Printing Tips: Supports are needed A brim is also needed to have enough bed adhesion Use a layer…
This is a remix of sorts - its the star that Croc stands on for reddadsteve's model, except there is a small raised brim to it. You can either stop the print after 1mm (the height of the star) and change filaments to print the rest of the…
Gridfinity tray for Ikea Samla with a brim to prevent slipping. Use 8 m3x12 button head cap screws (BHCS) and 8 m3 hex nuts to attach the two adapters to the 5x7 modular baseplate (4 screws per adapter are enough, but you can use more if…
Recently purchased the Brimhart Board Game Table from Amazon and wanted to create my own accessories, starting with a basic land station for MTG draft nights and general deck building purposes. The Base plate prints fine without supports…
I am working on design practices and the only way to get this to print is vertically, so we want as little post-processing and for it to be easy in the settings so we added a corner sprue to hold it down and not need a brim, it's not that…
Added small brim to original design for better grip and stability
🔥 Chibi Brimstone – Valorant 3D Model 🔥 Bring the tactical commander of Valorant to life in adorable chibi form! This 3D model of Brimstone captures his signature beard, cap, and confident stance — all reimagined in a cute, collectible…
Simple remix of @robrob awesome large cupholder model for the Brimhart Gaming Table. I added a 45 degree chamfer under the lip of the cup insert to eliminate the need for supports under the lip. I also added a matching chamfer to the…
This is a remix of sorts - its the star that Rat stands on from reddadsteve's model (see remix source for full Rat model), except there is a small raised brim to it. You can either stop the print after 1mm (the height of the star) and…
Brim Curve Forming Jig — Baseball Cap Brim Bender Give any flat-brim cap that classic curved-bill look, no heat gun or steam required. This two-piece jig sandwiches your cap's brim between a curved top and bottom plate, holding it in a…
This is a remix of sorts - its the star that Pig stands on from reddadsteve's model (see remix source for full Pig model), except there is a small raised brim to it. You can either stop the print after 1mm (the height of the star) and…
Attach a sports ball charm to the brim of your baseball hat 🧢. Choose from the following sports: 🏈 American Football (two variants) 🏉 Rugby (two variants) Printing Tips: Supports are needed A brim is also needed to have enough bed…
A small jig/tool to potentially provide a smaller radius to the brim of your cap. Let me know how it works for you guys and if it works well or what improvement it need.
This is a replacement clip for a light I got from Ace Hardware on a whim. The light clips under the brim of a baseball cap and is fantastic, but was cheaply made. The original clip broke within the first 10 days of use. I designed this to…
