Ikea Brimnes Bed Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers to raise the bed, opening drawers easier, reduction in humidity, aerate bottom of bed
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 1242
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These spacers are made to raise the bed off the floor by 25mm, enough so that the storage drawers can be easily used when you have carpets/rugs around the bed.
Additionally, they allow the underside of the bed to aerate/breathe, decreasing humidity and smells in the drawers.
I have been using them for more than a year and the difference in ease of use and reduction in smell in the drawers is dramatic.
No stability issues, they are rock solid.
You should print 1 x Center, 2 x Sides, 6 x Head/Feet.
Dimensions of the slots in the parts are:
Center : 20mm/18.5mm
Side : 20mm
Head/Feet : 23mm
Enjoy, please leave feedback and contact me if you need a modification or something similar.
Print Settings:
Material: Any, PETG Preferable
Layer Thickness: Any
Perimeters: 5+ perimeters
Infill: 15%+ Gyroid infill
Supports: Not needed
5 top/bottom layers