Limit Switch Mount for 2020 Aluminum Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for attaching NO-wired limit switches flush to the surface of a 2020 extrusion. Handy for custom gantries.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 192
- Wydruki
- 1
- Wyświetlenia
- 614
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Mount for attaching NO-wired limit switches flush to the surface of a 2020 extrusion. Handy for custom gantries.
The limit switch is directly fit into the little slot, as shown in the picture. Once screwed in to the extrusion, it should sit tightly between the extrusion and the mount.
The hole is sized for M5 screws. An M5 x 10 screw should be long enough to mount it to an extrusion.
It is also possible to attach the limit switch flush to a 2040 extrusion by cutting away the “legs” on one side of the mount.