1 / 8
Weather Display - ESP, Arduino, 2.4" TFT, Home Assistant - EATW — zdjęcie 1
1 / 8

Weather Display - ESP, Arduino, 2.4" TFT, Home Assistant - EATW

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The EATW (ESP-Arduino-TFT-Weather) is a small and simple weather display.

Ocena
0 / 5
Polubienia
17
Pobrania
101
Wydruki
0
Wyświetlenia
804
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

EATW (ESP-Arduino-TFT-Weather)

The EATW is a small device for displaying weather data that is gathered from Home Assistant via an ESP8266 and displayed on a 2.4" TFT Arduino Uno Shield. It makes use of some old hardware I had lying around and wanted to put to use to avoid getting e-wasted.

These are the 3D printed parts for my ESP-Arduino-TFT-Weather display. For more information on the project, please check out the GitHub page below. I've also included a Fusion 360 Archive and .STEP files for modifying the design easily.

More information on GitHub HERE: https://github.com/jwidess/ESP-Arduino-TFT-Weather

Full Image Album HERE: https://photos.app.goo.gl/iTXBMTu8txQHoKQs9

 

Printed Parts:

  • Enclosure Main Body

  • Top Lid

  • Bottom Lid

Printing Instructions: 

I recommended printing parts in the orientation shown in the slicer image above. PLA is fine for all parts. I recommend printing slowly with a low layer height, and outer/inner wall printing order for improved surface quality. Supports are only needed in the lid screw holes as shown in the image above,

 

Screws:

  • 4x M3x10mm (Lids)

  • 2x M3x6mm (USB-C Breakout)

Electronics:

 

GrabCAD Credits:

My Fusion 360 Archive file contains 3 designs from creators on GrabCAD which I used for designing the enclosure. Please check out these amazing designers at the links below!

  1. 2.4" TFT Display Shield - Daniel Barker

  2. Arduino Uno R3 - Andrew_Whitham

  3. NodeMcu V3 ESP8266 ESP-12E Development Board Lolin - Enes Sert

If you liked this project and built one yourself, don't forget to post your make of this model! You get rewarded with up to 10 Prusameters which can be redeemed for free Prusa gear!

Tagi