Panasonic DMW-BCM13 Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder for two Panasonic DMW-BCM13 Batteries.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple holder for two Panasonic DMW-BCM13 Batteries.
It works with all the BCM13x battery series (BCM13E, BCM13P and so on), as the dimensions are the same.
It's not really a remix, because I designed it from scratch on Onshape, but since it's heavily inspired by the Sony NP-BX1 battery holder by RodLaird, I thought it should be right to give him credit for the original design.
Just print it with the largest surface touching the printbed and you should be fine. No supports should be necessary,
You can choose the resolution and infill values that suit you best. I suggest 0.16 and at least 35% to give enough strength to the flaps that keep the battery in place.
P.S.: the picture refers to an older version of the holder, and it's for representation purposes only.