Prusa Spool Holder (MK3/S/+ / 4 / 4S) compatible screws for Prusament Masterspool Final Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of screw parts for Sonic_2_1's Prusament Masterspool which are compatible with the original Prusa spool holder.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 575
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a set of screws which fits Sonic_2_1's Prusament Masterspool Final Edition. They are just their screws but the middle bit is removed to make room for the bars of the Prusa spool holder that comes with the MK3/S/+. The ones from the original model are only compatible with the Mini+ and don't fit the MK3/S/+ spool holder.
Please post a Make of this print if you liked it and it was useful to you. Thank you!
Please note
Don't be confused by the preview of the 3D model here on PrusaPrinters. I removed the inner part of the screws with a negative volume right in the .3mf-file. Those negative volumes are being rendered in the preview, they will NOT be printed.
Print Settings
Print settings do not really matter. Just go with standard settings of e.g. a 0.2mm layer height print.
However, I suspect printing in PETG will make for a very high-friction experience when trying to screw both halves together. Probably use another kind of material. I used PLA.