Riser to use Bambu A1 silicone nozzle scrubber in place of brass brush heads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model to fit Bambu Lab A1 silicone nozzle scrubber brush to purge buckets which use brass brush heads
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a simple model to adapt a BambuLab A1 silicone nozzle wiper brush to purge buckets that are designed to use a brass brush.
Scrubber is slightly recessed to hold it more securely in place.
I'm using it in the Mandalaroseworks Bedpan on my Voron 2.4 but should work just as well with Blobifier or similar.
‘flush’ alternative positions the brush 3mm lower and flush with the top of my bed surface to prevent risk of collisions with beacon/cartographer probes when printing against that edge of the bed.
Attribution:
Ramalama2 Bedpan for Voron 2.4 - There are also buckets for non Mandala Roseworks beds
https://github.com/Ramalama2/Voron-2-Mods/tree/main/Mandalaroseworks/BedPan
Original Bedpan for Voron 2.4
https://github.com/Midnite3DP/voron-bedpan