Pivo pod replacement internal cylinder clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part replaces the clip that holds the top of the Pivo pod connected to the body.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This part replaces the clip that holds the top of the Pivo pod connected to the body. Sometimes one or more of the tabs of the original breaks off. This results in the top and bottom of the Pivo separating. In order to install this replacement you will need to open the rotator, and remove the motor.
When putting the rotator back together, you can unscrew the phone holder from the top part. Using a small flathead screwdriver, lift up the silicone pad along the top rim. You will find a small hole, rotate the upper part until it lines up with the screw hole in the bottom part. Insert screw and screw down, rotate the upper part to the next hole and repeat.