1 / 4
Shimano MTB Hydraulic Brake Bleed Kit (MTB M5x0.8 fitting) — zdjęcie 1
1 / 4

Shimano MTB Hydraulic Brake Bleed Kit (MTB M5x0.8 fitting)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a cup and plug for bleeding Shimano MTB Hydraulic Brakes with an M5x0.8 fitting

Ocena
0 / 5
Polubienia
9
Pobrania
91
Wydruki
0
Wyświetlenia
347
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is a cup and plug for bleeding Shimano MTB Hydraulic Brakes with an M5x0.8 fitting. Not to be confused with Shimano road bike fittings which are M7x0.75 thread, see https://www.thingiverse.com/thing:4672692 for an example.

Printing is somewhat challenging, the most important slicer setting is adaptive layer height. Best practice seems to be print from 25% to 75% of nozzle size, which is 0.1mm to 0.3mm for a 0.4mm nozzle. Print time for the cup is on the order of 20 minutes. Benefits from cleaning up the thread with a thread cutting die if possible.

The inner geometry of the cup is also designed to fit a 3.5 degree luer slip fit syringe (the standard syringe tip) so you should be able to jam a syringe into the cup and pull a vacuum.

[UPDATE]
Part has been updated to improve robustness.