Shimano MTB Hydraulic Brake Bleed Kit (MTB M5x0.8 fitting)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cup and plug for bleeding Shimano MTB Hydraulic Brakes with an M5x0.8 fitting
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 91
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a cup and plug for bleeding Shimano MTB Hydraulic Brakes with an M5x0.8 fitting. Not to be confused with Shimano road bike fittings which are M7x0.75 thread, see https://www.thingiverse.com/thing:4672692 for an example.
Printing is somewhat challenging, the most important slicer setting is adaptive layer height. Best practice seems to be print from 25% to 75% of nozzle size, which is 0.1mm to 0.3mm for a 0.4mm nozzle. Print time for the cup is on the order of 20 minutes. Benefits from cleaning up the thread with a thread cutting die if possible.
The inner geometry of the cup is also designed to fit a 3.5 degree luer slip fit syringe (the standard syringe tip) so you should be able to jam a syringe into the cup and pull a vacuum.
[UPDATE]
Part has been updated to improve robustness.
