OpenSCAD - Jeep NAG1 Transmission Dipstick Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added knob on the transmission dipstick knob, to make it much easier to remove. OpenSCAD model provided.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
On my 2011 Jeep Grand Cherokee, there is a knob/plug that you have to remove to check the transmission fluid level, using a aftermarket dipstick. It is very small, and very tight to remove, especially if it hasn't been removed in a while. This is a new, fitted knob made of PETG, that goes over the old knob. You can leave it loose and add it when you need it, or you can add a screw to it to keep it permanently in place. Yellow PETG would have been a better choice of color, as Jeep uses Yellow for other things, like the engine oil dipstick. This is for a NAG1 transmission, but may fit other dip stick knobs, with the customization allowed by the code in this model.