Mercedes hardline isolators (W115/W114)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Isolator bushings for hardlines found on my '73 W114 Mercedes, likely other models & years
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacements for the rubber hardline isolators on the chassis for my ongoing Mercedes 280 revival project. Some hold three hardlines (2 fuel 1 evap), some hold four (2 fuel 1 evap 1 brake). Mine were mostly missing but there were a few deteriorated & deformed parts to model from. It probably took less time to model and print these in TPU than to find the part number and order new ones, assuming they're even still available.
Printed in black 95a TPU, 2 walls top/bottom/sides 0.24 layer height 15% gyroid infill and they fit and work fine on my car. Dimensional accuracy may not be perfect, obviously for daily-driver cars and not concourse restorations.