Fiat Panda rearview mirror raise bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fiat Panda 2nd gen (model 169) bracket to be able to mount the rearview mirror higher.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
For tall people it's very annoying and even dangerous that the rear view mirror in a Fiat Panda 2nd gen is mounted as low as it is.
It's completely blocking my view.
So I made a bracket with which you can mount the stock mirror 2 or 3 cm higher, making it more easy to look underneath the mirror at traffic.
Mounting is pretty self explanatory looking at the photographs.
You need an extra bolt and nut. As the car was sold, I don't remember if it's a M4 or M5.
That's also the reason I couldn't make any more photographs of the final install. The white version was a test print, the final version was in black
Fits on a Fiat Panda 2nd gen (type 169) and maybe some other Fiat models.
Note:
Print this part as strong as you can with thick walls, the forces are pretty big when altering the mirror by hand.
Also, use ABS or ASA since PLA will melt in a hot car!