1 / 2
Geocache Bison Tube Magnet Holder 10x30x3 — zdjęcie 1
1 / 2

Geocache Bison Tube Magnet Holder 10x30x3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a holder for bison tubes where you can integrate an invisible magnet.

Ocena
0 / 5
Polubienia
1
Pobrania
15
Wydruki
0
Wyświetlenia
187
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I already lost 2 caches because I attached the magnets only with gaffer tape. Now I took a new approach and used a 3D printed magnet holder where the bison tube can be inserted (glued in).

 

The model contains an “invisible” slot for a 10x30x3 mm magnet.

It also has a plug so it can be properly closed and glued in.

Tagi