Halot Mage [Non-Pro & Pro] 37mm Vent Hose Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a vent hose adapter for the Halot Mage [Non-Pro & Pro version] and ts to Creality's Halot Mage vent hose (37mm).
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a vent hose adapter for the Halot Mage [non pro version]. It fits Creality's Halot Mage vent hose which I believe is for the pro version. Regardless, it's meant to fit inside 37mm hoses/tubes. Depending on your printer and tolerances, you may need to scale the print by 1 or 2% bigger/smaller. It should be a little challenging to get the vent tube on since it's such a close fit. There should also be little to no movement from the connection from the adapter to the machine. Fun little tip, if you want to test to see if your tolerances will work, you can drag the print down below the build plate on the z-axis in your slicer and it will slice what is above the plate only (at least that's how it works in Simplify3D). That'll save you time and material!
To avoid any supports, print from the hose/tube side (37mm side) on the build plate. The machine adapter side should be at the top.
This is a remix of woodepic's adapter. I've included the interface stl model so that anyone can build off and make a specific adaptor size/type.
I hope this helps!