Yaesu FT-891 Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective split rails for the Yaesu FT-891 that uses 3 brass M2 inserts and 3 M2 screws on each side.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 601
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Needed/wanted protective rails for my 891. I couldn't figure out how to split the stls I found on here and elsewhere, so I designed my own. This version is the third revision. Uses three M2 brass inserts for threads and three M2x10 screws for securing the split rails together. You will now need M4x16 or however long you want the screw to extend into the radio.
My print quality isn't the best, still figuring out my settings with petg after a few years. (I can't be bothered to do it all at once honestly.) But the layers are adhered well enough to make a functional print. Source files included.