K1C | K1 | K1Max - Camera 5° tilt + heatsink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified K1C camera mount that tilts the view down and left by 5° and allows heatsink to be installed on the camera chip
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Modified K1 series camera mount to shift the view down and to the left by 5° (See picture for camera view - can now see front of build plate), and allows a heat sink to be installed on the camera chip for higher chamber temperature operation.
Tilt inspired by @OnkyTonk (https://www.printables.com/model/982035-creality-k1-k1c-k1max-camera-mount-5deg-better-vie) - although does not use their model
Heat sink inspired by @AaronKelley_451572 (https://www.printables.com/model/946133-creality-k1-series-camera-heatsink-mod) - although does not use their model. There is apparently another (older?) model of camera in some K1 series units with the camera chip in the bottom, obviously this will not work for them.
This model combines these concepts and allows both a heat sink to be installed on the camera chip, and angles the camera for a better view. I also thickened the mount where the screw sits as I kept breaking them…
Confirmed to work with and clear both stock and BCJ (pictured) gantries. Also works with the NextGen3D fan mod (https://www.printables.com/model/904768-nexgen3d-creality-k1c-camera-fix) if you REALLY want cooling (pictured; also clears gantries).
Shown printed in ASA-GF. Recommended print orientation pictured.